A solemn event is coming, but do not know where to go to buy a ring? No problem! Fortunately, there are a large number of online stores on the Internet that offer bargains. However, before purchasing such an important gift, it is highly recommended to determine the size of the ring. It should be noted right away that the choice of jewelry for a girl is not difficult, but you still need to be extremely careful. In this article, we will talk about just that, and will provide maximum assistance.

Tips for a girl to choose gold or silver jewelry

There are just a few simple ways to help you decide on a long-awaited purchase. We have prepared the main ones so that you do not have to search for them all over the Internet for a long time.

Method One

In case you have a ring, but cannot determine the size of your finger, it is enough to use a regular ruler. If the piece of jewelry fits you perfectly, measure its diameter with the tool above. The ring must be measured with a ruler only in the widest place, otherwise the values ​​\u200b\u200bmay not correspond to reality. The size is usually calculated in millimeters. Women are considered standard from 15 millimeters or higher, and for men — from 17. However, these figures will not always be true, since there are individual cases.

Method two

If you still have not figured out how to determine the size of the rings, then we have prepared another affordable way. At the beginning of the procedure, we strongly recommend that you use the ring size chart in order to obtain more accurate results. To do this, you can print it. Further, it is enough just to put the already existing ring on the circle so that its diameter coincides with the figure in the table. Thus, you can easily determine the value. If you notice that the diameter is between the lower and higher number — always try to give preference to the second option.

Method three

To find out which ring is needed for your finger, you will need a regular thread or a small strip of plain paper. The thread, of course, is most suitable for this purpose. Here are a few simple steps to follow:

  • The thread must be wrapped as tightly as possible around the finger where you plan to wear the jewelry.
  • After that, the edges of the thread must be marked with a regular pen. You can also memorize where it starts and ends.
  • Then you just need to use this thread as a guide. You can attach it to the ruler — this figure will be the size that you need.

We advise you to always choose half a size larger, otherwise there is a risk that in the future it will be difficult to remove the jewelry. In most cases, it is necessary to look into the size grid of the rings, but not every girl is well versed in this. Using the simple tips that we have mentioned above, you will have no problem finding out the size of the ring in mm.

How to determine the ring size? Additional ways

Did the above methods seem too difficult for you? Do not despair, because we will tell you about a few more! So, method number four is that you can print the measuring tape yourself. There are many links to download such a tape on the Internet, so it will not be difficult for you to find it. The tape should also be wrapped around the finger, but this must be done carefully so as not to pinch it completely. After the procedure is completed, you will see a mark. This will be your size.

Another simple method is as follows. Take an ordinary thread, which is stored in every household. Also wrap it around your finger. At the same time, it is strongly not recommended to wrap the phalanx too tight, because you can get the wrong result. Where the tips touch each other — you should make a mark with a pen. A regular ruler will help you measure the area that you marked. The result in millimeters will be your value.

We select the size of the rings in cm. A few main tips

Experts strongly do not recommend taking measurements and even buying rings in the morning. The fact is that during this period, a person’s fingers can be small. It is also best for a girl to refuse an order on critical days, otherwise they will also affect the result. If you recently went in for sports or arrived from a trip — wait a few hours, or better — a day. Only after that, making a purchase in a jewelry store will be the right decision. We have prepared some more useful recommendations, because the ring size table is created with precision. It must be observed only in cases where 5-7 hours have passed after the flight. The fingers may swell, which will cause the wrong choice.

We also do not recommend trying on jewelry in hot or extremely cold weather. This will only make the situation worse. In order to correctly determine and not make a mistake, we recommend clenching your hand into a fist, waiting a couple of minutes, and only after that put on the jewelry. The size of the ring in diameter does not have to match the actual size of your finger, but it must be as close as possible in value.

Choosing jewelry for your beloved woman is a responsible process

Modern men make gifts not only for any celebration. If you still do not know how to win the heart of a beauty and do not even know about her desires, giving a ring will be the best solution. Try to use the methods of measuring the size, which we indicated earlier. If you have not succeeded, contact the specialists of this site. The manager will tell you which product is most suitable for your goals, and will help you make sure that you do not lose. All additional questions are discussed individually.